A complete tech pack defines every detail a new factory needs to quote, sample and inspect your garment accurately. That means fabric composition, weight and finish, a graded measurement spec with tolerances, construction methods, trims with supplier references, wash standards, labeling, packaging and compliance requirements. Wadhsons, a sourcing partner with 35+ years in China and an in-house design department known for denim, builds its development work on one principle: a factory can only quote, sample and inspect against what is written down. Without a detailed tech pack, the factory fills gaps with its own standard options. Once you move to a new supplier, your tech pack has to take the place of any shared history with your previous product.
TL;DR
- A tech pack replaces assumptions as your reference point. Finish it before you request quotes.
- Measurements need a “how to measure” note, a tolerance and a grade rule. Fabric needs composition, weight and finish targets.
- For denim, specify wash standards, shrinkage, stretch and hardware. These cause most of the variation in fit and look.
- Map every tech pack line to your apparel costing sheet so quotes from different factories can be compared.
- Put compliance, labeling and packaging inside the tech pack, where the factory will actually see them.
About the Author: This guide was written by the Wadhsons team. Wadhsons is a Hong Kong-headquartered supply chain partner founded in 1985, with an office in Guangzhou, China. Its in-house design department specialises in denim development, and its teams manage sampling, production control and quality inspection at vetted partner factories and mills.
What is a tech pack, and why does it matter for apparel development?
A tech pack is the technical document that tells a factory exactly how to make a garment: materials, measurements, construction, trims, colors, artwork, labels and packaging. It matters because any factory, new or existing, has no way to deliver consistent results without one.
Think of handing a baker a photo of a cake instead of the recipe. The photo shows the result. The baker still has to choose the flour, sugar ratio and oven time, so they use their own defaults. Factories work the same way. Any detail you leave blank gets filled with the factory’s standard option. That is why the same “copy my current jean” brief can come back from three factories with three different hand-feels, rises and washes.
Accurate quoting also depends on how complete your spec is. A development-led partner will quote MOQ and lead time against your specification. The more complete the tech pack, the more accurate those quotes will be.
What details should an apparel tech pack include before you switch suppliers?
A complete apparel tech pack covers the nine areas below. A gap in any of them gives the factory room to interpret.
| Component | What to include | Why it matters |
|---|---|---|
| Flat sketches | Front, back and detail views with callouts | Removes guesswork on design intent |
| Bill of materials | Fabric, trims, thread, labels, supplier references, color codes | Drives cost and how consistently materials are sourced |
| Measurement spec | Points of measure, how to measure, base size, tolerance | Tolerances are what QC inspects against |
| Grading | Increment per size for each point of measure | Prevents fit drift across the size range |
| Construction | Seam types, stitch density, seam allowances, finishing | Determines durability and appearance |
| Colorways | Pantone or approved lab dip per colorway | Gives a shared color standard |
| Artwork | Embroidery or print files, placement, sizing | Keeps logos consistent |
| Labels and packaging | Care, content and origin labels, hangtags, folding, polybags, cartons | Decides whether goods arrive retail-ready |
| Testing | Required tests and target results | Links quality to proof |
The most common gaps are a missing “how to measure” column and missing tolerances. Without them, a factory and your QC inspector can measure the same garment and get different results, and neither of them is wrong.
Which denim details are most often missing from tech packs?
Building on the general components above, denim adds variables that a standard tech pack template rarely covers. Washing changes the fabric, so the spec has to describe the garment after finishing, not only the raw cut.
- Fabric weight before and after wash, stated in ounces.
- Stretch and recovery targets, because stretch content affects fit and how the garment wears over time.
- Shrinkage allowance, with a clear note on whether measurements are pre-wash or finished. If this is unclear, the factory may cut to the wrong size.
- A physical wash standard, such as an approved wash panel, with abrasion, whiskers and tint described.
- Hardware: rivet and button finish, zipper type and placement.
- Back pocket details: embroidery stitch files, thread colors, and any leather or patch trims.
Wadhsons’ 2026 expansion into denim western wear is a good example. The range includes heavy 15oz stretch denim and heavily embroidered, leather-trimmed back pockets. Each of those details needs its own placement drawing and material callout.
[QUOTE REQUESTED: Dhiraj Wadhwani, Development Director, on the single denim specification brands most often leave out of a tech pack]
How should your tech pack connect to your apparel costing sheet?
A related but distinct question is how the tech pack feeds your numbers. An apparel costing sheet breaks a garment’s price into line items. Each line should trace back to a section of the tech pack.
| Tech pack section | Costing sheet line |
|---|---|
| Bill of materials | Fabric consumption, trims, thread |
| Construction | Cut, make and trim (CMT) |
| Wash and artwork | Wash, embroidery, print |
| Labels and packaging | Labels, hangtags, packing |
| Testing | Lab test fees |
When you ask apparel manufacturers in China, a garment factory in Bangladesh or clothing manufacturers in Turkey for quotes, have every factory price against your costing lines. That makes differences explainable. China stays competitive on more technical products because of its integrated supply chain. A landed-cost view will therefore tell you more than a factory price on its own.
What compliance and labeling details belong in the tech pack?
Stepping back from cost, compliance requirements should sit inside the tech pack rather than in a separate email. Factories build to the document they are given.
- Country-of-origin and care labeling that meets the rules of each destination market.
- Restricted substances, including regional rules such as California’s ban on PFAS.
- Required certifications at the factory or mill level. Common ones include BSCI and SEDEX for social compliance, and OEKO-TEX, GOTS and ISO standards for materials and quality.
- Packaging specification. Write your decisions on custom packaging, including product selection, sizing, materials and design, into your tech pack so the factory can reproduce them.
Should you use a tech pack template or tech pack software?
The choice depends on how many styles and people are involved. A spreadsheet or illustration-based tech pack template works well for a small range managed by one person. Tech pack software becomes useful once several people edit specs at once. It adds version control, comment threads and shared libraries of materials. Version control matters most. Factories that sample from an outdated file are a common cause of rejected samples, and keeping one clearly dated file prevents it.
What are the differences between a sourcing agent and a full-service sourcing company?
The scope of service differs depending on your needs and your tech pack maturity. Some partners connect you with factories and leave coordination to you. Others provide end-to-end support: design input, sampling management, production oversight, quality control and logistics. If your tech packs still have gaps, a partner with in-house design expertise can turn a reference garment and your brief into a specification that is ready for development. The right choice depends on how much support you need and how much of the technical work you can manage in-house.
Frequently Asked Questions
What is a tech pack?
It is a technical document that specifies how a garment is made: materials, measurements, construction, trims, labels and packaging.
Can I use my current supplier’s sample instead of a tech pack?
A sample is useful as a reference, but it cannot show tolerances, material sources or test requirements. Use it alongside a written spec.
How long does a tech pack take to prepare?
It depends on how complex the garment is. Denim with washes and embroidery takes longer than a basic knit.
Do I need tech pack software?
Not at first. Move to software when several people edit specs or your style count grows.
Who owns the patterns developed with a factory?
Confirm in writing whether patterns and tech pack files can be transferred to you before development starts.
Should measurements be taken before or after washing?
For washed garments, state finished measurements clearly and list shrinkage targets separately.
About Wadhsons
Wadhsons is a multinational supply chain and sourcing partner founded in 1985, with 35+ years of China-based sourcing experience and offices in Hong Kong and Guangzhou. It is known for denim design and manufacturing. Its in-house design department pays close attention to detail and sources premium fabrics at reasonable prices. Wadhsons covers development, sampling, quality inspection, manufacturing management and logistics at vetted partner factories and mills, with an ongoing focus on ESG and data-driven supply chain management.
If you are preparing tech packs for a move and want a design-led partner to review them, get in touch with the Wadhsons team at https://wadhsons.com/.